Antenna setup menu – guide lines – archive through april 03, 2008 – ecoustics. com

Posted on Monday, March 31, 2008 – 22:34 GMTThe values in the Antenna Setup Menu

This is the satellite that your receiver is locked into. How to receive free satellite tv signal There may be more than one, depending on your LNB and switch setup. Satellite tv software Keep in mind that several satellites may have the same configurations.


Satellite tv companies in my area For example, you may have one dish and one LNB pointed to Echostar 7. Free internet satellite tv software Yet, you may see that Echostar 8/10, Echostar 1/2, Echostar 5, and Nimiq 1 all appear to have a signal. Satellite tv software 2007 Of course, you know that one LNB equals one satellite, period. Pc satellite tv There is no way you can have several satellites lit up with only one LNB. Software to watch satellite tv on pc What happens in this case is that other satellites use the same settings as the one you are pointed at and therefore will show a response to the signal as if you were pointed to them. Is directv internet satellite That’s why some receivers have an indicator above the setup menu that tells you which one you are actually receiving. Dm04 digital satellite tv box That way, if you are set to Nimiq 1 and the indicator shows Echostar 8,10, then you know you are in fact pointed at Echostar 8,10 and not Nimiq 1.

This should always be ON. Free satellite tv guide Unless, of course, you don’t really want to watch TV.

There are different types of LNBs, just as there are different types of cars. Dish tv antenna installation instructions But in both cases, the different types all do the same thing:

Standard = This is called “Single” on some receivers. Satellite tv tuner software It’s a basic, generic, one-satellite LNB.

If it is circular (Dish/BEV/DirecTV type), it will receive all frequencies from 12200-12700 MHz. Direct tv antenna installation This is the range of direct-to-home satellites in North America. Watch satellite tv online free It has left and right polarity.

If it is linear (FTA type), it will receive all frequencies from 11700-12200 MHz. Cable or dish tv This is the range of all Ku-band free-to-air satellites in North America. Sony dvb s2 satellite tv tuner It has horizontal and vertical polarity.

A third type of standard LNB isn’t often used. Free satellite tv channels receiver It operates in the 3700-4200 MHz range, which is C-band. Satellite tv for your pc gratis This type of LNB goes with a large 6 to 12-foot dish.

A fourth type of standard LNB is a circular that is used for the Anik F3/Echostar 7 combo. Satellite tv guide europe It is designed to operate in the 11700-12750 MHz range but unlike the typical LNB used for FTA, it has left-right circular polarity rather than horizontal-vertical linear polarity.

OCS-DP = This is the setting if you have a DishPro LNB. When did satellite tv start Don’t use this if your LNB is not a DishPro.

Legacy Twin = This is twin “fatboy” type LNB made by Echostar that has either the Dish Network or Bell ExpressVu logo on it. Dish tv setup guide Unlike OCS-DP, it is not a DishPro and therefore does not have the DishPro logo.

Legacy Quad = Another “fatboy” LNB that is not DishPro. Coaxial cable satellite tv Unlike the twin, this one has four cable outputs for two receivers.

Universal = This type of LNB is used for linear-polarity Ku-band free-to-air. Satellite tv london ontario Unlike the Standard LNB, this one operates in the 10700-12750 MHz range, which covers the entire Ku-band spectrum. Satellite tv providers in nigeria Because it is linear, it cannot receive Dish Network or Bell ExpressVu, even though it covers the same frequency range. Tv satellite cable It will, however, get free-to-air. Digital satellite tv south africa Whether to use a Standard or Universal LNB for FTA is a matter of preference. Satellite tv installation uk Both will work and there are no advantages of one over the other.

Your receiver operates at a frequency range of 950-2150 MHz. Free to air satellite tv channels usa That is considerably less than the 3700-12750 MHz of the satellite signal that your dish picks up. Satellite tv antenna for caravans The setting called “LNB Freq” is actually an LOF or Local Oscillator Frequency. French tv satellite receiver How it works is simple: The frequency coming in from the satellite minus the frequency of the receiver is the LOF (LNB Freq). Tv satellite cable connectors In other words, a transponder broadcast at 12224 MHz is processed through the LNB and sent to the receiver at 974 MHz (12224 – 11250 = 974, so the LNB Freq is 11250). Satellite tv channels in india free Similarly, if the transponder is sending 11720 MHz, it goes to your receiver as 970 MHz (11720 – 10750 = 970, so the LNB freq is 10750).

Dish and BEV circular LNBs should be set to 11250 and FTA linear LNBs should be set to 10750. Telus satellite tv channels list C-band LNBs should be set to 5150. Free satellite tv on your computer The LNB Freq for the Anik F3/Echostar 7 combo LNB should be 10750. Free tv satellite box All types of OCS-DP and Legacy Twin/Quad should be set to 11250.

Because a Universal LNB has such a large range, it needs to use the receiver’s entire 950-2150 range, instead of the 950-1450 range that a Standard LNB uses. Top satellite tv providers Because of this, it has two settings– a High and a Low. How can i watch satellite tv on my pc For the most commonly used Universal LNB, the High is 10600 and the Low is 9750. Satellite tv companies in canada The two settings work together to make full use of the receiver’s range: The Low 9750 LOF down-converts from 10700-11900 to 950-2150 and the High 10600 down-converts from 11550-12750 to 950-2150.

A 22 kHz switch uses an electronic tone to differentiate between two LNB feeds. Zee alwan tv frequency arabsat The satellite that is plugged into the “Off” position on the switch should be set to “Off” in the Antenna settings and the one plugged into the “On” position should be set to “On” in the antenna settings. Satellite tv installer technician jobs If you do not have a 22 kHz switch, just leave this setting “Off”.

Think of this setting like numbers on a radio dial. Free satellite tv channels on pc download software You don’t have to have it set to any one of the transponders unless you are trying to point a dish or verify that you have a signal. Internet satellite tv player download Flip through the transponders just as you would flip through TV channels until you find one that has a good signal. Satellite tv guide uk Just like TV and radio channels, not all transponders will have a signal, and some will have a better signal than others.

This is the switch setting if you have a DiSEqC or DishPro switch. Telus satellite tv hd pvr receiver If you have only one satellite (thus not using any type of switch) or if your switch has a Dish Network or Bell ExpressVu logo but not a DishPro logo, this setting should be set to “None” or “Off”.

If you are using a 2-satellite DiSEqC switch, a 2-satellite DishPro switch, or a “fatboy” DishPro LNB, set to “Tone Burst A” or “Tone Burst B”, as appropriate.

If you are using a 4-satellite DiSEqC switch or a 3 or 4-satellite DishPro switch, set to “Port 1”, “Port 2”, “Port 3”, or “Port 4”, as appropriate.

If you do not have a motor, leave this setting off. Directv hd satellite dish pointing If you have a motor, you can use two different types of settings:

USALS automatically calculates where the motor must turn based on your longitude and latitude. Satellite tv for pc software free download Usually when you have your Motor set to USALS, you can press OK and enter this information.

DiSEqC 1.2 is used to move the dish with the remote control and manually store the location in the motor’s memory once you have an optimal signal. Bell satellite online tv guide In Viewsat and a few other receivers, this setting is called “User” or “Installer”.

This is the switch setting you use if you have a switch with a Dish Network or Bell ExpressVu logo that does not have a DishPro logo. Hum tv on satellite If you are using a DiSEqC or DishPro switch, or if you have only one satellite (thus not using any type of switch), this should be set to “None” or “Off”.

If you have a switch with a Dish Network or Bell ExpressVu logo that does not have a DishPro logo, select the setting that is appropriate.

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

LNB Type: Standard (if using Legacy), OCS-DP (if using Dish Pro)

Posted on Monday, March 31, 2008 – 23:00 GMTSome channel are on different setup

More dish is bigger, more you can catch channels, bigger dish work on all band, The LNB use makes the difference. Tv satellite boxes free Bigger dont be affected with snow or rain.

Leave a Reply

Your email address will not be published. Required fields are marked *