How the water calculator works _ newport news, va – official website
This calculator was adapted from the WaterSense Calculator, a program of the U.S. How much will my trip cost in gas and tolls Environmental Protection Agency (EPA). Cheap gas hot water heater prices It provides basic information about household fixtures (faucets and/or toilets) that are installed or replaced with WaterSense labeled models and estimates the amount of water that you can expect to save with these products.
The expected water savings are based on the billing of water and wastewater by various agencies on the Peninsula.
• Newport News Waterworks bills for domestic water usage about every 60 days.
• The Public Works’ Departments of Newport News and Hampton and the James city Service Authority use Waterworks’ meter reading to charge a “sewer user fee” to maintain local sewer lines.
Cost of driving calculator usa (York county and Poquoson charge a flat rate and bill quarterly.) The charges for sewer user fees vary by jurisdiction.
• Hampton Roads Sanitation District (HRSD), uses Waterworks’ meter reading to charge for treatment of sewer waste.
The overall average for these charges to Peninsula residents is $10.61 per hundred cubic feet (hcf) and this is a good number to use when calculating the cost of water and sewer. Gas cost calculator canada It is derived from:
• Waterworks rates (averaged, based on a typical household’s consumption of 11 hcf per billing period)
• Sewer User fees (averaged from the five jurisdictions, based on a typical household consumption).
Estimates for expected energy savings are provided based on the current rate structure from Virginia Dominion Power and Virginia Natural Gas. Estimate gas cost for a trip Note that energy savings are only realized if faucets are being replaced, since faucets usually use warm water which requires electricity or natural gas to heat.
• Hcf = hundred cubic feet (each hundred cubic feet = 748 gallons)
To provide estimated water and energy savings, the calculator assumes that all fixtures (e.g., faucets and/or toilets) within the household are being replaced or retrofitted with WaterSense labeled products.
It is assumed that the cost of one hundred cubic feet (hcf) of water (748 gallons) is about $10.61 for any Waterworks customer on the Peninsula (this includes Hampton, Newport News, and parts of James city county). Costco gas prices san diego county This includes the average cost for sewer line maintenance and sewer treatment by other agencies. How much does gas cost to drive cross country For Poquoson and York county, residential accounts are charged a flat fee and billed bimonthly.
The calculator determines the difference in gallons used by a WaterSense labeled toilet versus the toilet being replaced. Calculate gas cost road trip WaterSense labeled toilets use 1.28 gallons of water per flush or less. Gasoline prices in europe 2014 Toilets installed before 1980 use about 5 gallons per flush. Route planner fuel cost calculator Toilets installed between 1980 and 1994 use about 3.5 gallons per flush, and toilets installed after 1994 use about 1.6 gallons per flush. Fuel cost per km nz The calculator multiplies the savings by the number of people in each household, and the time period specified by the user. Gas cost to drive 1500 miles The calculator also assumes an average of 5.05 flushes per person per day.
The calculator determines the difference in gallons used by a WaterSense labeled faucet (or the retrofit of an old faucet with a WaterSense labeled aerator) versus the faucet being replaced. Estimate cost of gas It is assumed that use of a WaterSense labeled faucet, or the retrofit of an old faucet with a WaterSense labeled aerator, saves about 0.6 gallons per person per day. Average cost of gas per mile 2014 The calculator multiplies the savings by the number of people in each household, and the time period specified by the user.
To Estimate Energy Savings Associated with the Installation of WaterSense Labeled Faucets, or the Retrofit of Old Faucets with a WaterSense Labeled Aerators
The calculator determines how much it would cost to heat the water saved based on the selected energy source (e.g., natural gas or electricity), assuming that 73 percent of water that comes out of the tap in a typical household is heated. Gas cost calculator yearly It is also assumed that the average cost of 1 cubic foot (cu ft) of natural gas is $0.01 and that the average cost of 1 kilowatt-hour (kwh) of electricity is $0.11 based on Virginia rates.
When you use products bearing the WaterSense label, you can expect exceptional performance, savings on your water bills, and assurance that you are saving water for future generations. Gas prices in canada per gallon 2013 Look for the WaterSense label when buying plumbing fixtures.
Only products that are independently tested to meet EPA criteria for water efficiency and performance carry the WaterSense label.